Advances In Composite Materials Is A Collection Of Papers That Discusses Fiber Reinforced Composite Materials Pertaining To Their Mechanical And Failure Properties. One Paper Explains The Design And Fabrication Of A Grfrp Concept Car By The Ford Motor Company Which Uses As Much As Possible Graphite Fiber In The Body, Chassis, And Powertrain. Another Paper Discusses The Sorption Behavior Of Glass-fiber Reinforced Composites, As Well As The Influence Of Diffusing Media On The Deformation And Failure Behaviors. One Paper Examines The Physical, Elastic, Viscoelastic, And Inelastic Properties Of Multiphase Short Fiber Composite Materials Using The Fiber Aspect Ratio, Fiber Volume Fraction, And Properties Of The Constituent Phases As Several Variables. Another Paper Describes A Procedure To Measure The Changes In Stiffness Properties Of A Unidirectional Fibrous Composite (such As Glass Fiber Reinforced Polyester) Caused By Fatigue Damage. One Application Of Carbon Fiber Reinforced Thermoplastics Is In A Sleeve Bush Molded From Nylon 66 Containing 30 Percent Fiber Reinforcement With Ptfe And Silicone Oil. The Material Has Low Frictional, High Wear Performance Characteristics. The Penny And Giles Potentiometers Ltd. Use This Component On A Joystick For Gun Directional Control. The Collection Can Prove Useful For Design Engineers, Materials Engineers, Scientists Involved With Composite Materials, And Industrial Researchers In The Fields Of Materials Science.

lgli/9781483283708.pdf

lgrsnf/9781483283708.pdf

zlib/no-category/A. R. Bunsell (Eds.)/Advances in Composite Materials. Proceedings of the Third International Conference on Composite Materials, Held in Paris, 26–29 August 1980_2314226.pdf

Advances In Composite Materials: Proceedings Of The Third International Conference On Composite Materials, Paris, France, 26-29 August, 1980

Advances in Composite Materials (International series on the strength and fracture of materials and structures)

International Conference on Composite Materials (3rd 1980 Paris, France)

A. R. Bunsell, C. Bathias, A. Martrenchar, G. Verchery

edited by A.R. Bunsell ... [et al.]

Woodhead Publishing Ltd

John Murray Press

Focal Press

International series on the strength and fractureof materials and structures, Oxford, United Kingdom, 1980

International series on the strength and fracture of materialsand structures, Oxford, Sept. 1980

United Kingdom and Ireland, United Kingdom

United States, United States of America

San Diego, Saint Louis, Oct. 2013

1st ed edition, October 1980

lg1145517

{"isbns":["0080267173","1483283704","9780080267173","9781483283708"],"last_page":1820,"publisher":"Elsevier"}

Includes bibliographical references and indexes.
Co-sponsored by the Metallurgical Society of AIME (TMS-AIME) ... et al.

Content:
INTERNATIONAL SERIES ON THE STRENGTH AND FRACTURE OF MATERIALS AND STRUCTURES , Page ii
Front Matter , Page iii
Copyright , Page iv
FOREWORD , Pages 1-2 , A.R. BUNSELL
ADVANCED COMPOSITES: Past Perspective and Future Strategy , Pages 3-10 , George P. PETERSON
DESIGN AND FABRICATION OF A GrFRP CONCEPT AUTOMOBILE , Pages 11-24 , P. BEARDMORE, J.J. HARWOOD, E.J. HORTON
SORPTION BEHAVIOUR OF GLASS-FIBRE REINFORCED COMPOSITES AND THE INFLUENCE OF DIFFUSING MEDIA ON DEFORMATION AND FAILURE BEHAVIOUR , Pages 25-48 , G. MENGES, H.-W. GITSCHNER
DESIGN AND CONCEPTS OF COMPOSITE STRUCTURES , Pages 49-68 , Samuel J. DASTIN
ON THE THERMOMECHANICAL BEHAVIOR OF SHORT FIBER AND HYBRID COMPOSITES , Pages 69-80 , Tsu-Wei CHOU, Seiichi NOMURA
ANALYSIS OF THE COMPRESSION FATIGUE PROPERTIES OF A GRAPHITE/EPOXY COMPOSITE , Pages 81-94 , Donald F. ADAMS
EFFECTS INFLUENCING THE FIBRE CONCENTRATION DEPENDENCE OF TENSILE STRENGTH OF UNIDIRECTIONAL, SHORT-GLASS FIBRE REINFORCED THERMOPLASTICS , Pages 95-103 , W. HECKMANN, F. RAMSTEINER, R. THEYSOHN
CONTRIBUTION A L'ÉTUDE DU COMPORTEMENT A LA RUPTURE DES COMPOSITES A MATRICE THERMOSTABLE PSP A PARTIR D'OBSERVATIONS AU MICROSCOPE ÉLECTRONIQUE A BALAYAGE , Pages 104-119 , J.P. FAVRE, M. ROPARS
INFLUENCE OF INTERLAMINAR STRESSES ON FRACTURE TOUGHNESS OF COMPOSITE LAMINATES , Pages 120-129 , G. CAPRINO, L. CARRINO
TENSILE FRACTURE OF GRAPHITE/EPOXY LAMINATES WITH HOLES , Pages 130-145 , J.W. MAR, P.A. LAGACE
FATIGUE MECHANISM OF MULTIDIRECTIONAL LAMINATE UNDER AMBIENT AND ELEVATED TEMPERATURE , Pages 146-161 , Assa ROTEM
FATIGUE DEBONDING IN FIBROUS COMPOSITES , Pages 162-169 , P.A. GRADIN, J. BACKLUND
GROWTH MECHANISMS OF TRANSVERSE CRACKS AND PLY DELAMINATION IN COMPOSITE LAMINATES , Pages 170-185 , A.S.D. WANG
FRACTURE MECHANICS OF MODE I DELAMINATION IN COMPOSITE MATERIALS , Pages 186-197 , F.X. DE CHARENTENAY, M. BENZEGGAGH
THE INFLUENCE OF HOLES ON THE COMPRESSION STRENGTH OF GRAPHITE EPOXY CLOTH AND TAPE LAMINATE AT TEMPERATURES UP TO 430° K , Pages 198-211 , J.A. BAILIE, M.F. DUGGAN, L.M. FISHER, J.N. DICKSON
TENSILE FAILURE BEHAVIOUR OF EDGE NOTCH IN CARBON FIBER REINFORCED EPOXY COMPOSITE MATERIAL , Pages 212-222 , Xian XING-JUAN
ELECTRONS IMAGING OF MOLECULES IN DGEBA-CARBON FIBERS COMPOSITES , Pages 223-232 , M. GUIGON, J. AYACHE, A. OBERLIN, M. OBERLIN
FACTORS AFFECTING THE BALLISTIC IMPACT RESISTANCE OF KEVLAR LAMINATES , Pages 233-245 , Charlotte E. MORRISON, William H. BOWYER
EFFECTS OF SPECIMEN GEOMETRY ON THE MECHANICAL PROPERTIES OF A QUASI-ISOTROPIC GRAPHITE/EPOXY COMPOSITE , Pages 246-259 , J.-Paul SANDIFER
CREEP ANISOTROPY IN SHORT FIBRE REINFORCED THERMOPLASTICS , Pages 260-275 , M.A. CHRISTIE, M.W. DARLINGTON
THE EFFECTS OF CIRCULAR CUT-OUTS ON ANISOTROPIC GRP TUBES , Pages 276-290 , W.S. CARSWELL, S. SINGH, E.H. CHANDLER
A STUDY OF THE EFFECTS OF IMPERFECTIONS AND LAY-UP ANTISYMMETRY ON THE INITIAL FLEXURAL FAILURE RESPONSE OF CROSS-PLY STRIPS , Pages 291-304 , G.J. TURVEY
FACTORS AFFECTING THE COMPRESSION STRENGTH OF ALIGNED FIBRE COMPOSITES , Pages 305-312 , M.R. PIGGOTT, B. HARRIS
MECHANICAL BEHAVIOUR OF INTIMATELY-MIXED HYBRID COMPOSITES , Pages 313-326 , N.J. PARRATT, K.D. POTTER
STABILITY AND ULTIMATE STRENGTH OF CARBON FIBER REINFORCED PLASTIC PANELS , Pages 327-341 , L.-A. SAMUELSON, P. VESTERGREN, L. KNUTSSON, K.-G. WANGBERG, V. GAMZIUKAS
COMPORTEMENT VISCOÉLASTIQUE DES COMPOSITES A RENFORT FILAMENTAIRE ET MATRICE POLYMÈRE , Pages 342-356 , A. VAUTRIN, C. MOREAUX
ON THE MECHANICAL BEHAVIOUR OF FABRIC-STRENGTHENED COMPOSITES CONSIDERING THREE-DIMENSIONAL CROSS-LINKED STRUCTURE , Pages 357-371 , Tsuneo HIRAI, Takuya SENBA
EXPERIMENTAL STUDY OF THE NONLINEAR BEHAVIOUR OF COMPOSITE PANELS , Pages 372-386 , W.M. BANKS
SINGLE FIBRE AND HYBRID COMPOSITES WITH ALIGNED DISCONTINUOUS FIBRES IN POLYMER MATRIX , Pages 387-398 , Heinz RICHTER
COMPRESSIVE STRENGTH AND FRACTURE CHARACTERISTICS OF FIBER COMPOSITES UNDER IMPACT LOADING , Pages 399-413 , Sdao AMIJIMA, Tom FUJII
MECHANICAL BEHAVIOR OF THE HYBRID COMPOSITE SYSTEM: POLYESTER MATRIX/GLASS AND JUTE FIBERS , Pages 414-424 , K.K. CHAWLA, E.E.A. ARAGÃO, R.R.C. MONTEIRO, F.G. FERNANDEZ, M.M. MORAES
ON FAILURE MODES IN FINITE WIDTH ANGLE PLY LAMINATES , Pages 425-435 , C.T. HERAKOVICH
PREDICTING THE PERFORMANCE AND FAILURE OF MULTIDIRECTIONAL POLYMERIC MATRIX COMPOSITE LAMINATES: A COMBINED MICRO-MACRO APPROACH , Pages 436-452 , Ralph J. NUISMER
HIGH-MODULUS, HIGH-PERFORMANCE CARBON FIBER FROM PITCH PRECURSOR , Pages 453-460 , H.N. TOWNSEND
ACCELERATED CHARACTERIZATION OF GRAPHITE/EPOXY COMPOSITES , Pages 461-471 , W.I. GRIFFITH, D.H. MORRIS, H.F. BRINSON
STATISTICAL FATIGUE OF UNNOTCHED COMPOSITE LAMINATES , Pages 472-483 , J.N. YANG, D.L. JONES
EPOXY MATRICES FOR ADVANCED COMPOSITES. STRUCTURE AND ULTIMATE MECHANICAL PROPERTIES , Pages 484-496 , E.F. OLEYNIK, N.S. ENIKOLOPYAN
KEVLAR AND KEVLAR REINFORCED COMPOSITES MATERIALS AGING UNDER VARIOUS ENVIRONMENTS , Pages 497-513 , Christiane GOURDIN
ENVIRONMENTAL STRESS-CORROSION EDGE-CRACKING OF GLASS REINFORCED POLYESTERS , Pages 514-528 , J.E. BAILEY, T.M.W. FRYER, F.R. JONES
STRESSES DUE TO ENVIRONMENTAL CONDITIONING OF CROSS-PLY GRAPHITE/EPOXY LAMINATES , Pages 529-542 , David A. DOUGLASS, Yechiel WEITSMAN
NUCLEATION AND PROPAGATION OF CRACKS DURING STRAIN CORROSION OF GRP , Pages 543-555 , D. HULL, P.J. HOGG
LONG TERM STRENGTH OF GLASS REINFORCED PLASTICS IN WET ENVIRONMENTS , Pages 556-568 , J. AVESTON, A. KELLY, J.M. SILLWOOD
CREEP BEHAVIOR OF GLASS-EPOXY COMPOSITE LAMINATES UNDER HYGROTHERMAL CONDITIONS , Pages 569-583 , Chuan Seng WANG, Albert S.D. WANG
LONG-TERM BEHAVIOR OF COMPOSITE MATERIALS , Pages 584-596 , H.T. HAHN, T.T. CHIAO
HYDROTHERMAL AGING OF AN UNIDIRECTIONAL GLASS-FIBRE EPOXY COMPOSITE DURING WATER IMMERSION , Pages 597-612 , B. DEWIMILLE, J. THORIS, R. MAILFERT, A.R. BUNSELL
EFFECT OF NATURAL WEATHERING ON THE CREEP BEHAVIOUR OF GRP LAMINATES IN TROPICAL CLIMATES , Pages 613-623 , R.K. JAIN, K.K. ASTHANA
A METHOD OF CALCULATING FATIGUE AND FRACTURE OF GLASS FIBER REINFORCED MATERIALS UNDER LOAD AND TEMPERATURE , Pages 624-634 , Alfred RüBBEN, H. DOMKE
PROPAGATION D'ONDES DANS DES MATÉRIAUX COMPOSITES SILICE RÉSINE , Pages 635-648 , A. BERTHAULT, R. DORMEVAL, M. STELLY
ELASTOPLASTIC ANALYSIS OF THERMAL STRESSES AND AXIAL LOADING IN FIBER REINFORCED METALS , Pages 649-665 , Leif O.K. LARSSON
A HIGH PRECISION SINGULAR FINITE ELEMENT FOR FRACTURE ANALYSIS OF COMPOSITE STRUCTURES , Pages 666-678 , Glenn R. HEPPLER, Jorn S. HANSEN
ON DIMENSIONING COMPOSITES UNDER ALTERNATING LOADS , Pages 679-692 , G. MENGES, U. THEBING
OPTIMUM DESIGN OF LAMINATED GRP MATERIALS , Pages 693-706 , A.F. JOHNSON
HIGHER ORDER ASYMPTOTIC SOLUTION FOR WAVE PROPAGATION IN ELASTIC LAYERED COMPOSITES , Pages 707-718 , T.C.T. TING
NONLINEAR VISCOELASTICITY OF HIGH MODULUS FIBERS , Pages 719-727 , Frank K. KO
SOLUTION OF DIFFUSION AND VIBRATIONS PROBLEMS IN ORTHOTROPIC MEDIA , Pages 728-735 , P.A.A. LAURA, R.H. GUTIERREZ, G. SáNCHEZ SARMIENTO, F. BASOMBRíO
STRUCTURAL RELIABILITY OF COMPOSITE MATERIALS , Pages 736-748 , Pei Chi CHOU
EFFECTIVE ELASTIC MODULI OF CRACKED FIBER COMPOSITES , Pages 749-758 , T. GOTTESMAN, Z. HASHIN, M.A. BRULL
MEMBRANE ANALYSIS OF DISCRETE REINFORCED PLASTICS SHELLS SUBJECT TO UNIFORM PRESSURE LOADING , Pages 759-769 , I.H. MARSHALL, J. RHODES
THERMAL EXPANSION OF COMPOSITES WITH CANVAS-TYPE REINFORCEMENT AND POLYMER MATRIX , Pages 770-782 , J. KABELKA
STRESS DISTRIBUTIONS IN LAMINATED COMPOSITE CYLINDERS UNDER INTERNAL PRESSURE , Pages 783-795 , M. UEMURA, H. FUKUNAGA
ON THE DETERMINATION OF THE NON-LINEAR LONGITUDINAL MECHANICAL BEHAVIOUR OF SHORT-FIBRE COMPOSITES BY A THREE-DIMENSIONAL FINITE ELEMENT PROCEDURE , Pages 796-811 , J.I. CURISKIS
A PRELIMINARY DESIGN PROCEDURE FOR COMPOSITE PANELS WITH OPEN-SECTION STIFFENERS LOADED IN THE POST-BUCKLING RANGE , Pages 812-825 , J.N. DICKSON, S.B. BIGGERS
TI-59 PROGRAMS FOR ANALYSIS OF ADVANCED COMPOSITE MATERIALS , Pages 826-839 , Karyn T. KNOLL
ANALYSIS OF TUBULAR SPECIMEN FOR BIAXIAL TESTING OF COMPOSITE LAMINATES , Pages 840-855 , I.M. DANIEL, T. LIBER, R. VANDERBY, G.M. KOLLER
ROTATIONAL DISPLACEMENT OF FIBRES IN ± 45° KEVLAR LAMINATES UNDER ELASTIC STRAIN , Pages 856-865 , Rolf SöDERQVIST, Ingvar SCHILL
BIAXIAL STRENGTH OF GRAPHITE/EPOXY LAMINATES USING FLAT TEST SPECIMENS , Pages 866-874 , Sven-Erik THOR
EVALUATION OF THE EFFECT OF THE STATE OF CURE OF THE MATRIX ON THE PROPERTIES OF GLASS-FIBRE EPOXY RESIN LAMINATES , Pages 875-884 , K. PHILLIPS, M.G. BADER
FURTHER EVALUATION OF PROPOSED BIAXIAL STRESS TEST SPECIMEN FOR COMPOSITE MATERIALS , Pages 885-899 , Richard H. MARLOFF, Stephen E. GABRIELSE
A NEW TEST SPECIMEN GEOMETRY FOR ACHIEVING UNIFORM BIAXIAL STRESS DISTRIBUTIONS IN LAMINATED COMPOSITE CYLINDERS , Pages 900-913 , M.F. DUGGAN, J.A. BAILIE
TEST METHODS FOR IN-PLANE SHEAR MODULUS G 12 AND TRANSVERSE SHEAR MODULI G 13 AND G 23 , Pages 914-925 , Gia-Ju LI
CONSÉQUENCES DU DÉVELOPPEMENT DES MATÉRIAUX COMPOSITES A MATRICE PLASTIQUE SUR L'ÉCONOMIE NATIONALE , Pages 926-943 , ANTONIOLI
APPLICATION OF ACOUSTIC EMISSION TECHNIQUES FOR THE INVESTIGATION OF THE MECHANICAL BEHAVIOUR OF GRP COMPOSITE MATERIALS , Pages 944-958 , I. CRIVELLI VISCONTI, R. TETI, V. LANGONE
RADIOGRAPHIC CONTROL OF MINERAL FIBRE-REINFORCED CEMENT PLATES , Pages 959-972 , J.-C. DOMANUS, L. MøLLER JENSEN
DEFECT LOCATION IN STRUCTURES MADE FROM ADVANCED COMPOSITE MATERIALS , Pages 973-983 , P. CAWLEY, R.D. ADAMS
STRESS AND TIME DEPENDENT DAMAGE IN CARBON FIBRE REINFORCED PLASTICS , Pages 985-997 , D. LAROCHE, A.R. BUNSELL
ACOUSTIC EMISSION STUDY OF THE DEVELOPMENT OF DAMAGE IN GRP AND GRP STRUCTURES , Pages 998-1014 , M.G. PHILLIPS, B. HARRIS
EXPERIMENTAL ASSESSMENT OF STATIC AND FATIGUE DAMAGE OF GRAPHITE/EPOXY LAMINATES , Pages 1015-1028 , R.Y. KIM
APPLICATION OF THE HOLOGRAPHIC NONDESTRUCTIVE TESTING METHOD FOR EVALUATION OF DISBONDINGS IN SANDWICH PLATES , Pages 1029-1039 , Friedrich Erdmann-Jesnitzer, Thees Winkler
A COMPARISON OF FATIGUE DAMAGE DETECTION IN CARBON AND GLASS FIBRE EPOXY COMPOSITE MATERIALS BY ACOUSTIC EMISSION , Pages 1040-1049 , J. HOLT, P.J. WORTHINGTON
A NEW TECHNIQUE FOR THE MEASUREMENT OF GLASS FIBER ORIENTATION IN COMPOSITE MATERIALS , Pages 1050-1058 , F. POLATO, P. PARRINI, G. GIANOTTI
PRODUCTION READINESS VERIFICATION TESTING , Pages 1059-1074 , Arthur M. JAMES, Herman L. BOHON
MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED ALUMINIUM COMPOSITES , Pages 1075-1083 , A. OKURA, J. INAGAKI, E. NAKATA, S. IKEGAMI, T. OHSAKI, M. YOSHIDA
THE CARBON FIBER-CARBON AND SILICON CARBIDE BINARY MATRIX COMPOSITES A NEW CLASS OF MATERIALS FOR HIGH TEMPERATURE APPLICATIONS , Pages 1084-1097 , R. NASLAIN, P. HAGENMULLER, F. CHRISTIN, L. HERAUD, J.J. CHOURY
COMPARISON BETWEEN B4C/BORON AND SIC/BORON REINFORCED ALUMINIUM , Pages 1098-1114 , H.O. LEIS, P. PETERS
CREEP DEFORMATION AND CREEP RUPTURE OF FIBRE REINFORCED COMPOSITES , Pages 1115-1128 , A.R.T. DE SILVA
THE STRENGTH AND ELASTIC MODULUS OF MULTIFILAMENT SiC FIBRES , Pages 1129-1139 , C.H. ANDERSSON, R. WARREN
≪ THERMAL EXPANSION MEASUREMENTS OF METAL MATRIX COMPOSITES ≫ , Pages 1140-1152 , E.G. WOLFF, E.G. KENDALL, W.C. RILEY
THE EFFECT OF MATRIX SHEAR DEFORMATION AND CRACKING ON THE TOUGHNESS OF BORON/ALUMINUM , Pages 1153-1164 , Piet W.M. PETERS
PROPERTIES AND MICROSTRUCTURE OF METAL MATRIX COMPOSITES , Pages 1165-1176 , Donald WEBSTER
FATIGUE DAMAGE MECHANISMS IN BORON-ALUMINIUM COMPOSITE LAMINATES , Pages 1177-1190 , George J. DVORAK, William Steven JOHNSON
INFLUENCE OF HIGH STRAIN RATE ON THE MECHANICAL PROPERTIES OF AL-STEEL FIBRES COMPOSITE MATERIALS , Pages 1191-1198 , A. POLAKOVIC, L. TABORSKY, H. HYROSS
COST AND WEIGHT OPTIMISATION DECISIONS FOR G.R.P. , Pages 1199-1214 , J.A. QUINN
≪ THE EXPANSION OF CARBON FIBRES INTO INDUSTRY ≫ , Pages 1215-1232 , R. LUCAS
ADVANCES IN F.R.P. INDUSTRY IN INDIA , Pages 1233-1240 , L.M. MANOCHA
THE STRENGTH OF RIVETED JOINTS IN CFRP , Pages 1241-1246 , F.L. MATTHEWS, W.K. LEONG
THE DEVELOPMENT OF METAL END-FITTINGS FOR AXIALLY LOADED COMPOSITE COMPONENTS , Pages 1247-1263 , A.K. GREEN, L.N. PHILLIPS
A FATIGUE STUDY AND AN INVESTIGATION ON MECHANICALLY FASTENED JOINTS FOR THE DEVELOPMENT OF A FLAP , Pages 1264-1279 , P. MINDERHOUD
GLASS REINFORCED PLASTIC (GRP) PIPE COMPONENTS SUBJECTED TO VARIOUS LOADS , Pages 1280-1293 , R. KITCHING, C.J. KIRK
APPLICATIONS FOR COMPOSITES IN THE OFFSHORE ENVIRONMENT , Pages 1294-1309 , P.C. OLIVER
SOME POLISH INVESTIGATIONS ON PROPERTIES AND APPLICATIONS OF COMPOSITES POLYMER-CONCRETE MATERIALS , Pages 1311-1325 , Lech CZARNECKI, Jerzy PIETRZYKOWSKI, Michal SZWARC
GRP-PIPE FITTINGS PRODUCED ON A COMPUTER CONTROLLED FILAMENT WINDING MACHINE , Pages 1326-1334 , G. MENGES, E.A. HILLE
DESIGN AND MATERIAL IMPLICATIONS OF COMPOSITE DRIVESHAFTS , Pages 1335-1346 , Howard S. KLIGER, Derek N. YATES
ON THE DESIGN AND FABRICATION OF A GRAPHITE/EPOXY VIOLIN , Pages 1347-1354 , L.K. JOHN
WINGBLADES OF GLASS FIBRE REINFORCED POLYESTER FOR A 630 kW WINDTURBINE DESIGN, FABRICATION AND MATERIALS TESTING , Pages 1355-1367 , B.S. JOHANSEN, H. LILHOLT, Aa. LYSTRUP
STRUCTURAL DEVELOPMENT AND MOISTURE ABSORPTION BEHAVIOR OF A GRAPHITE/EPOXY OPTICAL METERING STRUCTURE FOR LANDSAT-D , Pages 1368-1381 , R. CLINE, H. FENIGER, J. STAATS, C. STROOPE, G. KRUMWEIDE
THE ROLE OF COMPOSITE SYSTEMS IN LOWERING ENERGY INPUT IN CONSTRUCTION , Pages 1382-1389 , Georges A. PATFOORT
THE USE OF CARBON AND HYBRID WOVEN FABRICS IN EMERGENCY AIRCRAFT REPAIR WORK , Pages 1390-1407 , K.F. ROGERS, D.M. KINGSTON-LEE, L.N. PHILLIPS
DEVELOPMENT, PRODUCTION, CALCULATION AND TESTING OF A CARBON/KEVLAR FIBRE REINFORCED FLAP , Pages 1408-1423 , L. MACHIELSE, D. SLAGER, C. VERNOOY
APPLICATION OF BFRP CRACK PATCHING TO MIRAGE III AIRCRAFT , Pages 1424-1438 , A.A. BAKER, R.J. CALLINAN, M.J. DAVIS, R. JONES, J.G. WILLIAMS
SATELLITE PROPULSION COMPOSITE TANKS FOR SPACE SHUTTLE APPLICATIONS , Pages 1439-1451 , Pramod SHANKAR
COMPOSITES IN THE BOEING 767 , Pages 1452-1464 , Robert H. HAMMER
LES PALES D'HÉLICOPTÈRES EN COMPOSITES: CONCEPTION, RÉALISATION ET COMPORTEMENT EN OPÉRATION , Pages 1465-1482 , par M. TORRES
PSP 6022 RESIN: A MATRIX FOR THERMOSTABLE, FIRE RESISTANT, HIGH PERFORMANCE COMPOSITE MATERIALS WITH EPOXY TYPE MANUFACTURING METHODS , Pages 1483-1500 , B. MALASSINE
PHTHALOCYANINE RESINS - NEW MATRIX MATERIALS FOR ADVANCED COMPOSITES , Pages 1501-1513 , R.Y. TING, H.C. NASH, R.L. COTTINGTON, C.J.N. RALL
UTILISATION DU CHAUFFAGE DIÉLECTRIQUE MICRO-ONDES POUR LA PRÉPARATION DE COMPOSITES EPOXY-VERRE ET EPOXY-GRAPHITE: ASPECTS THÉORIQUES ET PRATIQUES , Pages 1514-1520 , par Albert GOURDENNE, Philippe MONCHAUX, Quang LE VAN, Serge AUSSUDRE, Léo THOUREL, Nicole AUDO, Joseph NEDELEC
MICROCOMPUTER CONTROLLED FILAMENT WINDER , Pages 1521-1533 , Jeffrey F. KOBER
THE MECHANICAL PROPERTIES OF POLYESTER-GLASS LAMINATES CONTAINING SKIN-FORMING ADDITIVES , Pages 1534-1543 , G. PRITCHARD, J.G. HAIGH, G.J. SWAMPILLAI
THE INFLUENCE OF RESIN SYSTEM, CURE AND POSTCURE ON THE MECHANICAL PERFORMANCE OF GLASS FIBRE REINFORCED POLYESTERS , Pages 1544-1563 , L.S. NORWOOD, A.F. MILLMAN
DEFORMATION MECHANISMS OF FIBRE REINFORCEMENTS AND THEIR INFLUENCE ON THE FABRICATION OF COMPLEX STRUCTURAL PARTS , Pages 1564-1579 , K.D. POTTER
ADVANCED COMPOSITE STRUCTURE REPAIR , Pages 1580-1584 , Clark E. BECK
DIELECTROMETRY AS A CURE MONITORING TECHNIQUE FOR COMPOSITE/RESIN PROCESSING , Pages 1585-1596 , G.Wm. LAWLESS
CUTTING OF CFRP WITH SINGLE EDGE TOOLS , Pages 1597-1605 , Aksel KOPLEV
FLOW STATE OF COMPOSITE MATERIALS IN THE FORGING DIE DURING THE MOLDING PROCESS CONTINUED: EFFECTS OF MOLDING TEMPERATURE , Pages 1606-1619 , Tsuneo HIRAI, Tsutao KATAYAMA, Hiroyuki HAMADA
A METHOD FOR THE PRODUCTION OF HIGH QUALITY ALIGNED SHORT FIBRE MATS AND THEIR COMPOSITES , Pages 1620-1635 , H. EDWARDS, N.P. EVANS
RELATIONS BETWEEN PROPERTIES OF WETTING AND IMPREGNATION, TECHNOLOGY, AND APPLICATION OF FRP , Pages 1636-1651 , G. WIEDEMANN, H. ROTHE, A. HAASE, R. WIECHMANN
AUTOPSIE DE LA POLYMÉRISATION D'UNE RÉSINE D'IMPRÉGNATION APPLICATIONS AUX CUISSONS INDUSTRIELLES , Pages 1652-1661 , J. HOGNAT, A. DARTUS
DEVELOPMENT AND EVALUATION OF THERMOSPLASTIC/CARBON FIBER PREPREGS AND COMPOSITES , Pages 1662-1673 , P.E. McMAHON, M. MAXIMOVICH
ÉLABORATION DE MATERIAUX COMPOSITES RÉSISTANT A HAUTE TEMPÉRATURE PAR INJECTION DE RÉSINE PSP AU SEIN D'UN RENFORT TISSÉ (FABRICATION OF HEAT-RESISTANT COMPOSITE MATERIALS BY INJECTION OF PSP RESIN INTO A GLASS CLOTH REINFORCEMENT) , Pages 1674-1686 , B. BLOCH
ON POLYPROPYLENE-CELLULOSE FIBRE-CEMENT HYBRID COMPOSITES , Pages 1687-1699 , Y.W. MAI, R. ANDONIAN, B. COTTERELL
PREPARATION OF COMPOSITE MATERIALS EMPLOYING MATRIX SUPERPLASTICITY EFFECT , Pages 1700-1705 , F.N. TAVADZE, N.I. NADIRASHVILI, T.K. GLONTI, G.R. TOLORAIA
LIFETIME PREDICTIONS FOR POLYMERS AND COMPOSITES UNDER CONSTANT LOAD , Page 1706 , R.M. CHRISTENSEN
POST-BUCKLING AND MEMBRANE STRUCTURAL CAPABILITY OF COMPOSITE SHELL STRUCTURES , Pages 1707-1720 , J.E. RHODES
NOUVELLES TECHNIQUES DE CONTROLE NON DESTRUCTIF DES STRUCTURES BOBINÉES , Pages 1721-1731 , C. LE FLOC'H, J.P. MAIGRET
STIFFNESS BASED FATIGUE DAMAGE CHARACTERISATION OF FIBROUS COMPOSITES , Pages 1732-1739 , Ramesh TALREJA
COMPOSITE PROPELLER SHAFTS DESIGN AND OPTIMIZATION , Pages 1740-1755 , Ch. RUEGG, J. HABERMEIER
LES MATÉRIAUX COMPOSITES MULTIDIRECTIONNELS A HAUTES PERFORMANCES LEUR ÉLABORATION — LEUR CARACTÉRISATION , Pages 1756-1771 , F. ALBUGUES, J.P. DUPHIL
EQUIVALENT MATERIAL FOR THE ANALYSIS OF LAMINATED AND SANDWICH STRUCTURES , Pages 1772-1782 , Mahmoud Samy EL SHEIKH, NOR Sopha, Georges VERCHERY
OPTIMAL USE OF REDUNDANT MEASUREMENTS OF CONSTRAINED QUANTITIES. APPLICATION TO ELASTIC MODULI OF ANISOTROPIC COMPOSITE MATERIALS , Pages 1783-1795 , VONG Tat Sinh, Georges VERCHERY
CARBON FIBRE REINFORCED THERMOPLASTICS A COST EFFECTIVE MATERIAL FOR THE 80's , Pages 1796-1813 , Edward M. TREWIN, Robert F. TURNER, Andrew P. CLULEY
INDEX OF AUTHORS , Pages ibc1-ibc4
ACKNOWLEDGEMENTS , Page ibc5
Inside Back Cover , Page ibc6

2013-01-18