1 (p1): Keynote Papers 1 (p1-1): DD DRIVE TECHNOLOGY ON MACHINE TOOL—Presentstatus of DD motor(LinearMotor,Torque Motor)drive tecHnology and its future SOGABE masatoYo (Japan) 7 (p1-2): INTEGRATED QUALITY INFORMATION SYSTEM FOR COLLABORATIVE QUALITY MANAGEMENT IN GLOBAL MANUFACTURE TANG Xiaoqing(China) 13 (p2): Machining of New Materials 13 (p2-1): APPLICATION OF ARTIFICIAL NEURAL NETWORKS FOR TOOL CONDITION MONITORING WHEN TURNING Ti-6Al-4V ALLOY WITH HIGH PRESSURE COOLANT SUPPLY EZUGWU E.O.(UK),FADARE D.A.(UK,Nigeria),DA SILVA R.B.(UK),BONNEY J.(UK) 21 (p2-2): END MILLING OF AUSTENITIC STAINLESS STEEL FUJISE Kenryo(Japan) 27 (p2-3): STUDY ON GRINDING OF CARBON FIBER REINFORCED PLASTICS IN DRY METHOD FUJIWARA Junsuke,TASHIRO Tetsuya,HANASAKI Shinsaku(Japan) 33 (p2-4): THE ADDITION OF ALUMINIUM AND MAGNESIUM TO GRAY CAST IRON AS A METHOD OF REDUCING CERMET TOOL WEAR IN HIGH SPEED CUTTING FURUYA Satoshi,OZOE Nobuaki,USUKI Hiroshi,YAMANE Yasuo(Japan) 38 (p2-5): ANALYSIS OF DELAMINATION IN DRILLING COMPOSITE MATERIALS USING CORE-SAW DRILL HOCHENG Hong,TSAO Chunggchen(Taiwan China) 44 (p2-6): CUTTING OF WEAR AND IMPACT RESISTANT CEMENTED CARBIDES MIYAMOTO Takeshi(Japan),HEO Sung Jung(R.O.Korea),HANASAKI Shinsaku(Japan),FUJIWARA Junsuke (Japan) 50 (p2-7): TRANSITION OF FORM ACCURACY IN CYLINDRICAL PLUNGE GRINDING PROCESS OF Ti-Ni ALLOY OHASHI Kazuhito.TSUKAMOTO Shinya,HE Guifu,NAKAJIMA Toshikatsu(Japan) 56 (p2-8): REDUCTION OF FRACTURE OF WORK PIECE AT THE EXIT OF TOOL IN MACHINING POWDER COMPACT OF SINTERED STEEL SEKIYA Katsuhiko,YAMANE Yasuo (Japan) 62 (p2-9): CONTROL OF FRACTURE TOUGHNESS OF GLASS SURFACE FOR DEFECT-FREE MACHINING SHIRAKASHI Takahiro,GOTO Takashi(Japan) 68 (p2-10): IMPROVEMENT OF MACHINABILITY OF ALUMINUM CERAMIC SHIRAKASHI Takahiro,YAMADA Takahiro(Japan) 74 (p2-11): MACHINABILITY OF HARDENED SINTERED STEEL WADA Tadahiro,HIRO Kazuki,FUJIWARA Jurnsuke,HANASAKI Shinsaku(Japan) 80 (p2-12): ON...

zlibzh/no-category/陈五一等主编, Wuyi Chen, Beijing-Hangkong-Hangtian-Daxue, Seimitsu-kōgakkai, ICPMT, International Conference on Progress of Machining Technology, Jiagong Jishu Jinzhan Guoji Huiyi/加工技术进展 第七届加工技术进展国际会议论文集 英文版_118053804.pdf

Progress of machining technology : proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT 2004 : 8-11 December 2004, Suzhou, China

Progress of machining technology : proceedings of the 7th International Conference on Progress of Machining Technology, 8-11 December, 2004, Suzhou, China

Aviation Industry Press

China, People's Republic, China

Beijing, China, 2004

Bookmarks: p1 (p1): Keynote Papers
p1-1 (p1): DD DRIVE TECHNOLOGY ON MACHINE TOOL—Presentstatus of DD motor(LinearMotor,Torque Motor)drive tecHnology and its future SOGABE masatoYo (Japan)
p1-2 (p7): INTEGRATED QUALITY INFORMATION SYSTEM FOR COLLABORATIVE QUALITY MANAGEMENT IN GLOBAL MANUFACTURE TANG Xiaoqing(China)
p2 (p13): Machining of New Materials
p2-1 (p13): APPLICATION OF ARTIFICIAL NEURAL NETWORKS FOR TOOL CONDITION MONITORING WHEN TURNING Ti-6Al-4V ALLOY WITH HIGH PRESSURE COOLANT SUPPLY EZUGWU E.O.(UK),FADARE D.A.(UK,Nigeria),DA SILVA R.B.(UK),BONNEY J.(UK)
p2-2 (p21): END MILLING OF AUSTENITIC STAINLESS STEEL FUJISE Kenryo(Japan)
p2-3 (p27): STUDY ON GRINDING OF CARBON FIBER REINFORCED PLASTICS IN DRY METHOD FUJIWARA Junsuke,TASHIRO Tetsuya,HANASAKI Shinsaku(Japan)
p2-4 (p33): THE ADDITION OF ALUMINIUM AND MAGNESIUM TO GRAY CAST IRON AS A METHOD OF REDUCING CERMET TOOL WEAR IN HIGH SPEED CUTTING FURUYA Satoshi,OZOE Nobuaki,USUKI Hiroshi,YAMANE Yasuo(Japan)
p2-5 (p38): ANALYSIS OF DELAMINATION IN DRILLING COMPOSITE MATERIALS USING CORE-SAW DRILL HOCHENG Hong,TSAO Chunggchen(Taiwan China)
p2-6 (p44): CUTTING OF WEAR AND IMPACT RESISTANT CEMENTED CARBIDES MIYAMOTO Takeshi(Japan),HEO Sung Jung(R.O.Korea),HANASAKI Shinsaku(Japan),FUJIWARA Junsuke (Japan)
p2-7 (p50): TRANSITION OF FORM ACCURACY IN CYLINDRICAL PLUNGE GRINDING PROCESS OF Ti-Ni ALLOY OHASHI Kazuhito.TSUKAMOTO Shinya,HE Guifu,NAKAJIMA Toshikatsu(Japan)
p2-8 (p56): REDUCTION OF FRACTURE OF WORK PIECE AT THE EXIT OF TOOL IN MACHINING POWDER COMPACT OF SINTERED STEEL SEKIYA Katsuhiko,YAMANE Yasuo (Japan)
p2-9 (p62): CONTROL OF FRACTURE TOUGHNESS OF GLASS SURFACE FOR DEFECT-FREE MACHINING SHIRAKASHI Takahiro,GOTO Takashi(Japan)
p2-10 (p68): IMPROVEMENT OF MACHINABILITY OF ALUMINUM CERAMIC SHIRAKASHI Takahiro,YAMADA Takahiro(Japan)
p2-11 (p74): MACHINABILITY OF HARDENED SINTERED STEEL WADA Tadahiro,HIRO Kazuki,FUJIWARA Jurnsuke,HANASAKI Shinsaku(Japan)
p2-12 (p80): ON THE DUCTILE-MODE MACHININE OF OPTICAL GLASS UNDER CONVENTIONAL CU TTING CONDITlONS WAN Zhenping,TANG Yong,LIU Yajun(China)
p2-13 (p85): FACTORIAL STUDY ON NONLINEAR CHARACTERISTlCS OF ULTRA HIGH STRENGTH ALLOY STEEL IN HIGH-SPEED CUTTING PROCESS WANG Xibin,LONG Zhenhai,WANG Haochen,KANG Yunjiang(China)
p2-14 (p90): EXPERIMENTAL STUDY ON THE DRILLING OF CAST
p2-15 (p90): NICKEL-BASED SUPER ALLOY K24 XING Lihua,CHEN Xiang,ZHANG Deyuan(China)
p2-16 (p96): ELLIPTIC DELAMINATION OF HOLE EXIT ZONE IN CARBON FIBRE-REINFORCED PLASTICS CAUSED BY DRILLING ZHANG Houjiang,CHEN Wuyi,FAN Rui,CHEN Dingchang(China)
p2-17 (p102): RESEARCH ON ULTRA-PRECISION PROCESSING OF KTP ZHAO Ping,LOU Feiyan,YUAN Julong,WANG Zhiwei,DU Weipeng(China)
p2-18 (p107): EXPERIMENTAL STUDY ON HIGH SPEED FACE-MILLING OF MB2 MAGNESIUM ALLOY ZHAO Wenxiang,WANG Xibin,LONG Zhenh ai,PANG Siqin(China)
p3 (p111): New Tool Materials and New Abrasive Tools
p3-1 (p111): HIGH-SPEED CUTTING OR HIGH HARDNESS STEEL CUTTING FOR END MILLS MADE OF CEMENTED CARBIDE WITH ULTRA MICRO GRAIN IWAMOTO Koji(Japan)
p3-2 (p116): FABRICATION OF Ni-W ELECTROPLATED MICRO DIAMOND GRINDING TOOLS AND THEIR APPLICATION TO GROOVING IN SILICON NISHIHARA Kunio,ONIKURA Hiromichi,SAKASE Tadayuki(Japan)
p3-3 (p122): MINIMIZING PROCESS OF SURFACE ROUGHNESS IN GRINDING WITH SUPER-SOFT GRADE RESINOID WHEEL OHASHI Kazuhito,TSUKAMOTO Shinya,NAKAJIMA Toshikatsu(Japan)
p3-4 (p128): CERMET TOOL FAILURE AND ITS CONTROL IN MACHINING LINE OF BEARING PRODUCTION OYAMA Akira,MASUDA Masahiro,ARIMURA Masatoshi,MORIKAWA Masahiro,NOGAMI Teruo,OGAWA Hitoshi(Japan)
p3-5 (p133): FUNDAMENTAL STUDY OF THE SINTERING CHARACTERISTICS OF FUNCTIONALLY GRADIENT MATERIALS Takeshi TANAKA,Tatsuya K AWAI(Japan)
p3-6 (p139): DEVELOPMENT OF TiC WHISKER GRINDING WHEEL WEI Yuanqian,WANG Ailing,ZHU Xijing,CAO Ruixiang,PAN Jinsheng,HU Mandong(China)
p3-7 (p144): COMPRESSIVE FATIGUE CHARACTERISTICS OF WC-Co BASED ALLOYS YAMAMOTO Tsutomu,SAKAGAMI Kusuhiko(Japan)
p3-8 (p150): STUDY ON CUTTING PERFORMANCE OF MAN-MADE DIAMAND FOR MACHINING NONFERROUS METAL ZHANG Pengfei,YU Qixun,PANG Siqin,LIN Jin,LIU Xiangdong(China)
p3-9 (p154): MANUFACTURING PROCESS OF INSIDE-HOLDING ELECTROPLATING DIAMOND REAMER ZHENG Guanghua,WANG Chunhai,FU Jianjun(China)
p4 (p158): Cutting/Grinding Fluids
p4-1 (p158): THE STUDY OF SPECIAL ELID PRECISION SURFACE GRINDING FLUIDS FOR COMPOSITE MATERIALS GUAN Jialiang,FAN Jinwei,LIU Bendong,HUANG Xudong(China)
p4-2 (p163): LUBRICANT APPLYING EFFECT IN STAINLESS STEEL CUTTING KANEEDA Toshiaki,OKADA Yoshikazu,Anthony Laurence(Japan)
p4-3 (p169): DRILLING WITH MQL PROCESS MAKIYAMA Tadashi,YAMANE Yasuo(Japan)
p4-4 (p175): LUBRICANTING CHARACTERISTICS AND CUTTING PERFORMACE OF ESTERS FOR MQL SYSTEM TSUBOI Yochiro,WAKABAYASHI Toshiaki,SUDA Satoshi,TSUKUDA Akira,BANDO Shinnosuke(Japan)
p4-5 (p181): EFFECT OF CUTTING ATMOSPHERE ON TOOL WEAR OF COATED CARBIDE END MILLS USUKI Hiroshi,MATSUMOTO Katsuya,SATO Kiminori,FURUYA Satoshi,
p4-6 (p181): MORIYA Mitsuhiro,IWATA Kaoru,SAWADA Taisuke,SHIMA Nobuhiko（Japan）
p4-7 (p187): ENVIRONMENTALLY BENIGN MACHINING WITH COMBINED MIST-JET ECO-MACHINING FLUIDS WEI Yuanqian,WANG Ailing,ZHU Xijing,SUN Xudong,LIU Zhongzhu,MEN Hao(China)
p4-8 (p191): THE EFFECT OF OIL-MIST APPLICATION ON THE MACHINABILITY
p4-9 (p191): IN TURNING OF SUPER HEAT-RESISTANT ALLOY INCONEL 718 YATSUZAKI Toru,ONIKURA Hiromichi(Japan)
p5 (p197): Pr ecision,Micro and Nano-machining
p5-1 (p197): STUDY ON NANOIMPRINT LITHOGRAPHY WITH HIGH PRECISION ALIGNMENT HUANG Rongiie,FAN Xiqiu,LU Zhiwen,WANG Linhong(China)
p5-2 (p203): IMPROVEMENT OF THE QUALITY AND PERFORMANCE OF MICRO
p5-3 (p203): FLAT DRILLS WITH A DIAMETER OF 10 um OHNISHI OsaMmu,ONIKURA Hiromichi,YAMAMOTO Kenichiro,MIN Seung-Ki,KOGA Toshinobu(Japan)
p5-4 (p209): EFFECT OF Al-Mn COMPOUND ON MIRROR SURFACE INTEGRITY IN ULTRA-PRECISION CUTTING OF MAGNESIUN ALLOY OKUDA Koichi,TAKENO Yoshihisa(Japan)
p5-5 (p215): ULTRA-SMOOTHNESS GRINDING OF GLASS WITH#140 METAL BOND DIAMOND WHEEL SAWA Takekazu,YASUI Heiji(Japan)
p6 (p219): Abrasive Machining
p6-1 (p219): EXPERIMENTAL INVESTIGAATIONS INTO JIG GRINDING CHURI NJ,PEI Z.J.(USA)
p6-2 (p225): PREDICTION OF SURFACE ROUGHNESS IN CYLINDRICAL LONGITUDINAL GRINDING BASED ON EVOLUTIONARY NEURAL NETWORKS LI Guofa,WANG Longshan,DING Ning(China)
p6-3 (p230): ANALYSIS OF FORCES ACTING ON THE ABRASIVE GRITS IN THE DIAMOND SAWING OF GRANITE LI Yuan,XU Xipeng(China)
p6-4 (p236): COOLANT FLOW CHARACTERISTICS IN A SEGMENTED GRINDING WHEEL SYSTEM NGUYEN Thai,ZHANG Liangchi(Australia)
p6-5 (p242): HIGH SMOOTHNESS GRINDING OF ALUMINUM ALLOY WITH SURFACE TRAVERSE GRINDING ODAKI Toshimi,YASUI HeijiTOMITA Susumu(Japan)
p6-6 (p248): THERMAL CHARACTERISTICS IN SURFACE GRINDING OF ENGINEERING CERAMICS SHEN Jianyun,XU Xipeng(China)
p6-7 (p254): ADAPTABILITY OF POLISHING DISK TO THE SURFACE OF AUTOMOTIVE DIES IN FLOATING POLISHING XU Xiaocun,YUAN Zhejun,CHEN Yuquan,HUANG Qingbao(China)
p6-8 (p258): MILL-GRINDING MACHINING FOR PARTICLE-REINFORCED ALUMINUM MATRIX COMPOSITES YAO Yingxue,LI Depu,YUAN Zhejun(China)
p6-9 (p264): IDENTIFICaTION OF DIAMOND DRESSER BLUNT USING SPC AND AE TECHNIQUE IN GRINDING PROCESSES ZAN Tao,WANG Min,FEI Renyuan,YANG Jianwu,XU Hongan(China)
p6-10 (p269): RESEARCH OF DRESSING TECHNOLOGY ON MAJOR DIAMETER THIN ACETAB ULIFORM DIAMOND WHEEL ZHAO Wenxiang,WANG Xibin,LI Yafei l,KUANG Ximei,PANG Siqin(China)
p6-11 (p275): PROPOSAL OF 5-BODY FINISHING TECHNOLOGY FOR LONG TOOL LIFE ZHOU Wenjun,TANI Yasuhiro,KAWATA Kenji(Japan)
p7 (p281): Unconventional Machining
p7-1 (p281): BIO-LIMITED FORMING TECHNOLOGY BASED ON MICROORGANISM AND ITS APPLICATION CAI Jun,LI Yaqin,LI Xiangfeng,CHEN Bo,ZHANG Deyuan(China)
p7-2 (p286): RESEARCH ON BIO-MACHINING BASED ON LIPID CHEN Bo,CAI Jun,ZHANG Bo,YUE Jiachang,ZHANG Deyuan(China)
p7-3 (p292): RESEARCH ON THE MECHANICAL-ELECTROCHEMICAL POLISHING OF PURE TITANIUM CHEN Yuquan,DONG Shen,QIU Feng,XU Xiaocun,HUANG Qingbao(China)
p7-4 (p297): MICROULTRASONIC MACHINING USING MULTITOOLS EGASHIRA Kai,TANIGUCHI Tomoya,TSUCHIYA Hachiro,MIYAZAKI Makoto(Japan)
p7-5 (p302): RESEARCH ON TECHNOLOGY OF WIRE ELECTRICAL DISCHARGE MACHINING WITH A ROTATOR WIRE ELECTRODE FU Sheng,SHI Zhaoyao,XU Zhongsi(China)
p7-6 (p307): RESEARCH ON LAMINATED OBJECT MANUFACTURING TECHNOLOGY FOR METAL FUNCTION PART BASED ON THE LARGE THICKNESS SLICE GUO Pingying,LU Chunyue,ZHANG Jitang(China)
p7-7 (p312): THREE-DIMENSIONAL ELECTROCHEMICAL GENERATING MICROMACHINING GUO Zhongning,HAN Guihai(China)
p7-8 (p318): STUDY ON THE TECHNOLOGY OF PRECISION ELECTROCHEMICAL CONTOUR EVOLUTION MACHINING OF INTEGRAL IMPELLERS KANG Min,XU Jiawen(China)
p7-9 (p324): COLOR FINISHING OF TITANIUM ALLOY USING A NEW ELECTRICAL GRINDING TECHNIQUE KATAHIRA Kazutoshi,OHMORI Hitoshi,MIZUTANI Masayoshi,KOMOTORI Jun(Japan)
p7-10 (p330): THREE DIMENSIONAL NANO FABRICaTION OF SINGLE CRYSTAL SILICON BY FOCUSED ION BEAM AND SUBSEQUENT WET CHEMICAL ETCHING KAWASEGI Noritaka,MORITA Noboru,YAMADA Shigeru,TAKANO Noboru,OYAMA Tatsuo,ASHIDA Kiwamu,TANIGUCHI Jun,MIYAMOTO Iwao(Japan)
p7-11 (p336): STUDY ON THE LOW-FREQUENCY VIBRATION TAPPING IN NICKEL-BASE SUPER ALLOY LI Guangiun,HAN Fengqi,ZhANG Deyuan(China)
p7-12 (p342): A MATHEMATICAL MODEL BASED ON CHEMO-MECHANICAL EQUILIBRIUM FOR CHEMICAL MECHANICAL POLISHING PROCESS OF SILICON NITRIDE BALLS LU Binghai,YUAN Julong,YAO Yingxue,WANG Zhiwei,LOU Feiyan(China)
p7-13 (p348): STUDY ON CO2LASER CUTTING OF MAGNESIUM ALLOY SHEET OKUDA Koichi,UENO M asaaki,NUNOBIKI Masayuki,SHIMADA Yoshihiro(Japan)
p7-14 (p354): A STUDY ON MACHINING PROCESS SIMULaTION OF NC-WEDM SYSTEM OF POLAR COORDINATES BY MEANS OF COMPUTER REN Fujun,WANG Dianjun(China)
p7-15 (p360): INFLUENCE OF TEMPERATURE AND PROCESS PARAMETERS ON BENDING ANGLE IN LASER FORMING SENTOKU Eisuke,UEDA Takashi,YAMADA Keiji,HOSOKAWA Akira,TANAKA Ryutaro(Japan)
p7-16 (p366): STUDY ON VIBRATION CUTTING BY USING PIEZO-ELECTRIC ACTUATORS TANAKA Hisataka,SATO Masahiko,SAKAMOTO Satoshi,OKAMURA Susumu,FUJIWARA Yoshiyuki(Japan)
p7-17 (p372): EXPERIMENTAL STUDIES ON FINISH HIGH-SPEED WEDM IN GAS WANG Tong,ZHANG Xinfu,ZHAO Xuefang(China)
p7-18 (p376): INVESTIGATION ON CUTTING TIME RATIO AND DRILLING FORCE OF VIBRATION DRILING WANG Xin,LIU Xiangyang,WANG Lijiang(China)
p7-19 (p382): STUDY ON ENERGY DENSITY NEEDED IN ND：YAG LASER POLISHING OF CVD DIAMOND THICK-FILM XU Feng,ZUO Dunwen,WANG Min(China)
p7-20 (p388): THE DISCHARGE CYLINDRICAL GRINDING TECHNOLOGY BASED ON WIRE EDM MACHINE YANG ZhaojunJIA Qinggxiang,ZHANG Lixin,FENG Huanqin,ZHANG Haiwei(China)
p7-21 (p392): TOOLWEAR IN ROTARY UITRASONIC MACHINING OF ADVANCED CERAMICS ZENG W.M.(China),LI Z.C.(USA),PEI Z.J.(USA),TREADWELL C.(USA)
p7-22 (p398): STUDY ON MICRO-HOLE VIBRATION DRILLING AND MAGNETIC DEBURRING ZHANG Peng,LI Xianhao,ZHANG Deyuan(China)
p7-23 (p402): DEVELOPMENT OF THE INTEGRATED INSTRUMENT FOR POLYMERASE CHAIN REACTION,BIOCHIP HYBRIDIZATION AND FLUORESCENCE DETECTION ZHU Jijun,CHENG Jia,LIU Quanjun,LIU Aiyun,WANG Hong,LU Zuhong(China)
p8 (p407): New Machine Tools and Tooling Technology
p8-1 (p407): DYNAMIC MODELING OF A 3-DOF PARALLEL MACHINE TOOL WITH ACTUATION REDUNDANCY BAI Zhifu,HAN Xianguo,CHEN Wuyi(China)
p8-2 (p413): MACHINING TECHNOLOGY OF SELF-ROTARY CUTTING TOOL CHANG Xing,PANG Xuehui,WU Wenge(China)
p8-3 (p418): FAILURE ANALYSIS OF CNC LATHES CHEN Diansheng,WANG Tianmiao,WEI Hongxing,CHEN Jia(China)
p8-4 (p424): STUDY ON THE KINEMATICS OF A NEW REDUNDANT ACTUATED PKMS HAN Xianguo,CHEN Wuyi(China)
p8-5 (p430): AUTO POSITIONING SYSTEM FOR REGRINDING OF SMALL-DIAMETER TOOLS INOUE Shigeru,AOYAMA Tojiro(Japan)
p8-6 (p436): A STUDY ON THE HIGH-SPEED MILLING USING SMALL-DIAMETER END MILL TOOL KATO Hideharu,SHINTANI Kazuhiro,IWATA Kazuo,SUGITA Hiroaki(Japan)
p8-7 (p442): LUBRICATION MECHANISM BY OIL-MIST LUBRICATION AND OIL-AIR LUBRICATION TO SPINDLE BEARING AND ITS EFFECT ON THERMAL DISPLACEMENT KORETA Noriyuki,ARIO Hidenobu,SASAKI Masaaki (Japan)
p8-8 (p448): A NEW TYPE OF SHAVING CUTTER USED FOR WORKING INVOLUTE SPUR AND HELICAL GEAR LI Shujuan,XUN SHaobin,HE Caiyun(China)
p8-9 (p452): RESEARCH ON THE TRANSDUCER OF THE ULTRASONIC ELLIPTICAL VIBRATION CUTTING BASED ON THE FINITE ELEMENT METHOD LI Xun,JI Yuan,ZHANG Deyuan(China)
p8-10 (p458): STUDY ON FORCE DENSITY FUNCTION OF COMPLEX THREE-DIMENSION GROOVES MILLING INSERT LI Zhenjia,CHENG Yaonan,ZHENG Minli,ZHANG Runhong(China)
p8-11 (p463): PRECISION DESIGN OF FORM TURNING TOOLS WITH AXIAL FEEDING LIU Jiehua,ZHAO Huiling(China)
p8-12 (p468): A SIMULATED INVESTIGATION ON THE MACHINING INSTABILITY AND DYNAMIC SURFACE GENERATION LUO Xueke(China),LIU Ying(China),CHENG K ai(UK),LUO Xichun(UK)
p8-13 (p474): INFLUENCE OF THE CHARACTERISTICS OF TOOL HOLDERS ON THE SURFACE QUALITY IN HIGH-SPEED BALL END MILLING OF ALLOY TOOL STEEL OKABE Masayuki,HATAKEYAMA Shuichi,SATO Kohei,WADA Masaki,YONEYAMA Minoru,FUJITAKE Shuji(Japan)
p8-14 (p480): ANALYSIS OF PROFILE ERROR AS MACHINING SPATIAL HELICAL SURFACE WITH EX-ARC-GENERATRIX APPROACH METHOD WANG Ke,FU Yusheng,SUN Feng(China)
p8-15 (p486): FAILURE MODE,EFFECT AND CRITICALITY ANALYSIS OF CNC LATHES WANG Min,CHEN Diansheng,LU Tianshan(China)
p8-16 (p491): THE MACHINING STABILITY ANALYSIS FOR BORING THIN WAILED HOLLOW WORKPIECES WANG Min,FEI Renyuan,YANG Jianwu,XIE Chunliu(China)
p8-17 (p496): ON THE KINEMATICS AND LINEAR INTERPOLATION OF A PARALLEL KINEMATICS MACHINE TOOL WANG Ruiqiu,CHEN Wuyi(China)
p8-18 (p502): OPTIMIZATION DESIGN OF HYDRODYNAMIC BEARING WITH MULTIPLE SPIRAL ROOVES WU Liangsheng,LIU Pingan,LIU Zhengping,LIU Zhenyu,YANG Qingkun,WEI Yuanqian(China)
p8-19 (p508): DEVELOPMENT OF A CHIP-BREAKING TOOL FOR TAPPING YAMAUCHI Masako,HORIUCHI Osamu,MURAKAMI Yoshihiko,SUGANO Hiroto,SHIBUTANI Hideo(Japan)
p8-20 (p514): RESEARCH ON THE DEVICES FOR CUTTING EDGE TREATMENT OF ELECTROPOLISHING YAN Xianguo,PANG Siqing,ZHAO Wenxiang,LI Yongtang,WANG Jianmei(China)
p8-21 (p520): KINEMATICS DESIGN OF MACHINE TOOL WITH BONNET FOR ASPHERIC SURFACE POLISHING YAO Yingxue,GAO Bo,XIE Dagang,YUAN Zhejun(China)
p8-22 (p526): EFFECTS OF JACKSCREWS OF SURFACE GRINDING MACHINES ON THEIR ROCKING MODE VIBRATIONS YOSHIDA Kiichi,NODA Yutaka,MAEJIMA Miyabi,YANAGIDA Kouichi,UDUKA Hayato(Japan)
p8-23 (p530): THE WORKING TABLE DESIGN WITH HIGH SPECIFIC STIFFNESS FOR HIGH SPEED MACHINE TOOL YU Maolin,CHEN Wuyi(China)
p8-24 (p536): STUDY ON DYNAMICS OF VIRTUAL AXIS HYBRID POLISHING MACHINE TOOL WITH CLEARANCE YU Miao,ZHAO Ji,ZHONG Sheng,ZHANG Lei(China)
p8-25 (p541): COMPUTER AIDED 3D DESIGN AND DATABASE OF QUN DRILL ZHANG Jingying,PANG Siqin,YU Qixun(China)
p9 (p545): Monitoring and Control of the Machining Process
p9-1 (p545): RESEARCH ON THE MICROGEAR MEASUREMENT TECHNIQUE BASED ON CCD IMAGE CHEN Xiangwei,WANG Longshan,LIU Qingmin,DING Ning(China)
p9-2 (p551): MACHINE TOOL CONTROLLER BASED ON M COS-ⅡCHEN Youdong,WANG Tianmiao,WEI Hongxing,CAO Yunan(China)
p9-3 (p555): DEVELOPMENT OF TOUCH SENSOR BASED ON GRINDING FLUID SPOUTING PHENOMENON FUJIWARA Takanori,TSUKAMOTO Shinya,NISHII Atsuhiko(Japan)
p9-4 (p561): A NON-CONTACT COMPENSATION METHOD OF AN ALiGNMENT AND A RADIUS OF A GRINDING WHEEL IN ULTRA-PRECISiON GRiNDER FUKUTA Masahiko,YAMANE Yasuo,SEKIYA Katsuhiko,SGINO Tadanori(Japan)
p9-5 (p567): RESEARCH ON FREQUENCY CONTROL TO ULTRASONIC TRANSDUCER JIANG Xinggang,ZHANG Deyuan(China)
p9-6 (p571): CHARACTERISTIC OF PROJECTION IMAGE WIDTH OF END MILLS WITH SMALL DIAMETER KAWANO Yoshihiro(Japan),ZUO Dunwen(China),YOSHIMITU Shinichi(Japan),MINAMI Akira(Japan),YAMASHITA Shunichi(Japan)
p9-7 (p576): MONITORING OF WEAR OF SINGLE CRYATAL DIAMOND TOOLS US ING STATIC CUTTING FORCES KONDO Eiji,IWAMOTO Ryuichi,TANAKA Ippei,KAWAGOISHI Norio(Japan)
p9-8 (p582): OPEN AND RECONFIGURABLE CHARACTERISTICS ON ONC UNIT OF DIGITIZED MANUFACTURING LI Weiguang,ZHOU Jianhui,ZHAO Bo,ZHU Jinhua(China)
p9-9 (p587): IMPROVING ACCURACY OF PKMS BY ACTIVE FORCE CONTROL OF REDUNDANT LEG LIANG Hui,BAI Zhifu,CHEN Wuyi(China)
p9-10 (p593): THE CALIBRaTION OF LINE STRUCTURE LIGHT MEASURING SYSTEM IN REVERSE ENGINEERING MAO Chi,TAN Guanggyu,HUANG Jianmei(China)
p9-11 (p598): ESTIMATION OF WELD SIZE OF PARTIAL PENETRATION BUTT WELDS B Y ULTRASONIC TESTING MATSUURA Hiroshi (Japan)
p9-12 (p604): AN INTELLIGENT PROCESS CONTROL SYSYEM FOR END MILLING PROCESSES MUROZUMI Masanori,SARAIE Hidenori,KAKINO Yoshiaki,IBARAKI Souichi(Japan)
p9-13 (p610): A CONSTANT CUTTING FORCE CONTROL FOR FINISHING PROCESS OF DIE AND MOLD BY USING A BALL END MILL NISHIDA Susumu,KAKINO Yoshiaki,SUDO Katsuzo,OHTSUKA Hirotoshi,YAMAJI Iwao,IBARAKI Soichi(Japan)
p9-14 (p616): TOOL WEAR ESTIMATION UNDER A STRATEGY FOR CONSTANT CUTTING FORCES IN END MILLING OHTS UKA Hirotoshi,YAMAJI Iwao,KAKINO Yoshiaki,NAKAGAWA Heisaburo,SUDO Katsuzo,NISHIDA Susumu(Japan)
p9-15 (p622): MONITORING OF STABILITY OF DYNAMIC CUTTING PROCESS IN END-MILLING BY MEASUREMENT OF SPINDLE HEAD VIBRATIONS SHIMANA Kenji,KONDO Eiji,HAGIHARA Koichi,KAWAGOISHI Norio(Japan)
p9-16 (p628): VIBRATION SUPPRESSION CONTROL OF
p9-17 (p628): LINEAR MOTOR DRIVEN MACHINE TOOL—lst report:Application results of multi-point variable damping filter SOGABE Masatoyo,IWASHITA Yasusuke,KAKINO Yoshiaki(Japan)
p9-18 (p634): AN EMBEDDED MONITOR OF CONSTRUCTION MACHINERY BASED ON ARM WANG Tianmiao,CHEN Diansheng,WEI Hongxing,TAO Wei(China)
p9-19 (p639): CHATTER SUPPRESSION BASED ON RECOGNIZING STABLE SPINDLE SPEED WANG Xiaojun,YU Junyi,ZHAO Hongwei,JIA Qingxiang(China)
p9-20 (p645): AN NC MACHINING SIMULATION SYSTEM DEVELOPMENT AND MACHINING ERROR ANALYSIS WANG Zhanli,YU Junyi,WANG Lingyan(China)
p9-21 (p651): ANALYSIS OF VIBRATION IN ID SLICING PROCESS OF SILICON INGOT WEI Xin,XIE Zhenhua,HUANG Ruiwei,XIONG Wei(China)
p9-22 (p656): THE PRECISION MOTION CONTROL BASED ON MOTION CONTROLLER WU Shuqing(China)
p9-23 (p660): ON-LINE MONITORING OF DRILLING THRUST OF MICRO-DRILLS YANG Zhaojun,CUI Yaxin,SUN Yanhong,YANG Yonghai(China)
p9-24 (p664): A NEWLY DEVELOPED CRACK DETECTING METHOD USING REACTIVE ION ETCHING YOKOMIZO Seiichi,KUBOTA Shinichirou,UNO Yoshiyuki(Japan)
p9-25 (p670): RESEARCH ON NON-CONTACT TOOL SETTING SYSTEM FOR TOOL GRINGDING MACHINE ZHANG Xi,CHEN Wuyi,WANG Dingding(China)
p9-26 (p676): STUDY ON AN INTELLECTUALIZATION CNC SYSTEM WITH OPEN ARCHITECTURE ZOU Qin,GUO Yinbiao(China)
p9-27 (p682): FEAS IB ILITY OF PROJECTION IMAGE APPLICATION IN ON-LINE MEASUREMENT OF END-MILL RADIALWEAR ZUO Dunwen(China),K AWA NO Yoshihiro(Japan),WANG Min(China),YOSHIMITU Shinichi(Japan),YAMASHITA Shunichi(Japan)
p10 (p687): Surface Integrity and Machining Quality
p10-1 (p687): STUDY ON DEPTH OF WORK HARDENED SURFACE LAYER IN ORTHOGONAL NON-FERROUS METAL CUTTING HIKIJI Rikio,HARADA Masakazu,KAWANO Yoshihiro,KONDO Eiji,ARAI Minoru(Japan)
p10-2 (p693): EFFECT OF BURNISHING PARAMETERS ON SURFACE MICROHARDNESS IN THE BURNISHING OF NON-FERROUS METALS LUO Hongyun,LIU Jianying,WANG Lij iang,ZHONG Qunpeng(China)
p10-3 (p699): THE EFFECT OF LIQUID NITROGEN AT SURFACE GRINDING ON THE MICROSTRUCTURE OF A QUENCHABLE STEEL NGUYEN Thai,ZHANG Liangchi,ZARUDI Irena(Australia)
p10-4 (p705): STUDY ON THE RESIDUAL STRESS OF ALUMINUM ALLOY BY USING DISTORTION MEASRUEMENT WANG Zhaojun,CHEN Wuyi,ZHANG Yidu,CHEN Zhitong,LIU Qiang (China)
p10-5 (p710): SURFACE INTEGRITY IN HIGH EFFICIENCY REVERSIBLE FINE MACHINING TECHNIQUE WU Wenge,PANG Siqin,CHANG Xing(China)
p10-6 (p714): RESIDUAL STRESSES IN STEEL COMPONENTS GROUND WITHOUT LIQUID COOLANT XIAO Keqin,ZHANG Liangchi(Australia)
p11 (p719): Cutting Mechanisms,Analysis and Simulation
p11-1 (p719): WEAR BEHAVIORS OF BORON CARBIDE CERAMIC NOZZLES IN DRY ABRASIVE BLASTING SURFACE TREATMENTS DENG Jianxin(China)
p11-2 (p724): EROSIVE WEAR BEHAVIORS OF COALWATER SLURRY NOZZLES DING Zeliang,DENG Jianxin,LI Jianfeng,YANG Jing(China)
p11-3 (p730): SIMULATION OF EFFECT OF CLAMPING ON RESIDUAL STRESS OF AERO-COMPONENTS B Y MEANS OF FEM GUO Hun,ZUO Dunwen,YU Wei,WANG Min,WANG Shuhong(China)
p11-4 (p735): ADVANCES OF MOLECULAR DYNAMICS SIMULATION FOR ULTRA-FINE MACHINING HUANG Zhigang,GUO Zhongning(China)
p11-5 (p741): THE STUDY OF VIRTUAL DEBUGGING OF AUTOMOBILE MOLDS BASED ON AUTOFORM LI Jinyu(China),CHEN Yuquan(China),WU Lingwei(China),DING Yongle(China),GUO Lingrong(China),LIU Shengdong(USA)
p11-6 (p747): NUMERICAL SIMULATION OF THE ROLL PRESSURE DISTRIBUTION OF ALUMINUM STRIP ON HOT ROLLING PROCESS LIU Xiaobo,ZHANG Xiaoli(China)
p11-7 (p753): DEVELOPMENT OF CUTTING SIMULATOR FOR END MILLING OBIKAWA Toshiyuki,SHINOZUKA Jun,SONODA Tetsuri,SASAJIMA Kazuyuki(Japan)
p11-8 (p759): THE PREDICTION OF CUTTING PARAMETER USING GREY SYSTEM THEORY PANG Xuehui,WU Wenge,CHANG Xing(China)
p11-9 (p763): MECHANICS ANALYSIS FOR NEW STRUCTURE OF DRY CUTTING CIRCULAR SAW BLADE QIU Jun,HUANG Wei,WANG Zhiwei,HU Yingning(China)
p11-10 (p769): FINITE ELEMENT ANALYSIS ON TEMPERATURE AND MACHINING ACCURACY OF FINE BORING PROCESS SASAHARA Hiroyu ki,TANG YuLong(Japan)
p11-11 (p775): A NEW MODELING METHOD FOR TURNING SIMULATION SHA Zhihua,ZHAO Liang,ZHANG Shengfang,GE Yanjun (China)
p11-12 (p780): 3D STRESS FIELD ANALYSIS AND FUZZY COMPREHENSIVE EVALUaTION FOR MILLING INSERTWITH COMPLEX GROOVE TAN Guangyu(China),LI Zhaokun(China),LIU Guangjun(China),RONG Yiming(USA)
p11-13 (p786): EFFECT OF ADDITIONAL CURRENT ON CUTTING MECHANISM OF
p11-14 (p786): FREE MACHINING STEELS IN TURNING TANAKA Ryutaro,HOSOKAWA Akira,YAMADA Keiji,UEDA Takashi(Japan)
p11-15 (p792): EFFECTIVE PREDICTION OF CUTTING FORCES AND STATIC FORM ERRORS IN FLEXIBLE END MILLING WAN Min,ZHANG Weihong(China)
p11-16 (p798): A STUDY ON INTERFERENCE DETECTION SIMULATION OF TUBE BENDING MACHINE BASED ON UG WANG Chunjie,ZHAO Xiang,MA Liangwen,ZONG Xiao(China)
p11-17 (p803): STUDY ON BOUNDARY NOTCH OF CEMENTED CARBIDE CUTTING TOOL WANG Guicheng,PEI Hon鲥ie,LI Qinfeng,ZHANG Chunye(China)
p11-18 (p809): HEaTANALYSIS ON STRIP MILL WORKROLL BEARING CHOCK BY 3D FINITE ELEMENT METHOD WANG Jianmei,YANG Shichun,HUANG Qingxue,YAN Xianguo(China)
p11-19 (p814): THE FORMATION MECHANISM AND PHYSICAL SIMULATiON OF CHIP WANG Xiao,LIU Huixia,YANG Rundang,WU Bo,CAI Lan(China)
p11-20 (p819): STUDY ON THE FORMING MECHAMISM OF SERRATED CHIP IN HIGH SPEED TURNING FOR STEEL YE Bangyan,XU Jin,WU Weijie,ZHAO Xuezhi,LIU Xiaochu(China)
p12 (p823): Information Technologies in Manufacturing
p12-1 (p823): A NEW METHOD OF MACHINING FEATURES RECONGNITION BASED ON FEATURE DESIGN CHENG Kai,ZHANG Weibo(China)
p12-2 (p829): AN INTEGRATED MANAGEMENT SYSTEM OF PRODUCTION-PREPARATION INFORM-ATION CI Jianping,SUN Houfang,LEI Hegong(China)
p12-3 (p834): RESEARCH ON DESIGN AND REALIZATION OF MASS CUSTOMIZATiON-ORIENTED PRODUCT DATA AIDED MANAGEMENT SYSTEM LI Renwang,ZOU Tingting,ZHANG Sirong,LIU Lei(China)
p12-4 (p839): RESEARCH ON PRODUCT LIFECYCLE-ORIENTED VIRTUAL ASSEMBLY TECHNOLOGY LTU Jianhua,XU Hongshan,NING Ruxin,YAO Jun(China)
p12-5 (p845): COMPUTER-AIDED MANUFACTURING PLANNING FOR MASS CUSTOMIZATION RONG Yiming,YAO Suqin,HAN Xiangli(USA)
p12-6 (p851): AN INTERNET-BASED SYSTEM FOR MASS CUSTOMIZATION PRODUCT DEVELOPMENT SHAN Meihua,LI Renwang(China)
p12-7 (p857): RESEARCH ON E-MANUFACTURING IN VIRTUAL ENVIROMENT SHEN Xingquan(China)
p12-8 (p861): A NEW APPROACH TO SUPPLIER EVALUATION SUN Guozi,YU Dingwen,WU Zhijun,LIU Jia(China)
p12-9 (p867): STUDY ON A MULTI-REASONING PRESS PROCESS DECISION SYSTEM BASED ON THE DISPERSED KNOWLEDGE BASES WA NG Xiankun,WU Shaonian(China)
p12-10 (p873): MANUFACTURING KNOWLEDGE MANAGEMENT AND IMPLEMENTaTION IN A PDM SYSTEM WANG Yucheng,QIAO Lihong(China)
p12-11 (p879): A HOPFIELD NEURAL NETWORK ALGORITHM FOR MACHINING OPERATIONS SEQUENCING YAN Haitao,QIAO Lihong(China)
p12-12 (p885): AN ALGORITHM STUDY FOR JOB SHOP SCHEDULING WITH AITERNATIVE OPERATION ROUTES YUAN Xin,YANG Zhibing,CI Jianping(China)
p12-13 (p892): APPLICATION OF DATABASE TECHNIQUE IN SECTION CURVE SMOOTHING OF FORM WHEEL ZHANG Xiaohong,ZHANG Ziqiang,ZHENG Zhidan,CHEN Shaobo,YAN Qiusheng(China)
p13 (p896): Modeling and CNC Machining
p13-1 (p896): NUMERICAL PREDICTION OF SURFACE TOPOGRAPHY A ND ROUGHNESS IN MILLING PROCESS GAO Tong,ZHANG Weihong,QIU Kepeng,WAN Min(China)
p13-2 (p902): PRE-PROCESSING OF DATA POINTS AND SUR FACE RECONSTRUCTION IN RRE HUANG Jianmei,TAN Guangyu(China)
p13-3 (p908): OPTIMUM TOOL POSITION AND EFFECT OF MQL ON SURFACE ROUGHNESS IN FIVE-AXIS MILLING WITH BALL-NOSED END MILL KORETA Noriyuki(Japan),OOSAKI Takayosi(Japan),ZHAO Xioming(China)
p13-4 (p914): SURFACE RECONSTRUCTION BASED ON PLANAR CURVATURE TO EXTRACT FEATURE LINE FROM SCATTERED DAIA POINTS LIU Huixia,WANG Xiao,LIANG Jiahhong,FU Yon刨hong,YUAN Run,CAI Lan(China)
p13-5 (p920): RECONSTRUCTION OF 3D MODELS FROM SIMPLIFIED AND HIERARCHICAL 2D DRAWINGS OF PRODUCTS MASAJI Tanaka,TOSHIAKI Kaneeda,JYUNJI Hirocka,SHIGEYUKI Okabe(Japan)
p13-6 (p926): 3D DIGITIZATION TECHNOLOGY AND ITS APPLICATIONS IN REVERSING ENGINEERING PENG Qingjin(Canada)
p13-7 (p932): DEVELOPMENT OF A SIMULATION SYSTEM FOR SURFACE TOPOGRAPHIC FEATURES IN 5-AXIS CNC MACHINING PROCESS SOSHI Masakazu(USA),LIU Xianbing(USA),YAMAZAKI Kazuo(USA),MORI Masahiko(Japan)
p13-8 (p938): A GENETIC OPTIMAL ALGORITHM FOR PLANE LINE PROFILE EVALUATION BASED ON AUTO-SPOTTING WANG Boping,JING Daying(China)
p13-9 (p943): APPLICATION OF THE HERMITE METHOD ON TOOL PATH GENERaTION WANG Ruiqiu,CHEN Wuyi(China)
p13-10 (p949): RESEACH ON A REVERSE ENGINEERING METHOD FOR 3D SURFACE USING SINGLE IMAGE WU Fenghe,SHI Fazhong(China)
p13-11 (p954): STITCHING MODELS FOR MULTIPLE TRIMMED SURFACE USING DYNAMIC TOLERANCE ZHANG Su,SHI Fazhhong(China)
p13-12 (p960): APPLICATION OF APPROXIMATE DOUBLE CIRCULAR ARC INTERPOLATED METHOD IN NC PROGRAMMING OF ASPHERIC CURVE ZHANG Ziqiang,LUO Yihe,ZHENG Zhidan,CHEN Shaobo(China)
p14 (p965): Other Topics in Advanced Manufacturing Technology
p14-1 (p965): SYNTHESIS OF SLIDER CRANK MECHANISM WITH THE CHARACTERISTIC OF QUICK-RETURN HAN Jiguang,WANG Guicheng(China)
p14-2 (p969): A PROJECT BASED LEARNING PROGRAM COLLABORATED WITH LOCAL ENTERPRISE KONDO Yasuo,TANAKA Hisataka,MIYACHIKA Kouitsu,AKAO Takahiro(Japan)
p14-3 (p975): FRACTAL SURFACE OF SiCPMETAL MATRIX COMPOSITES AND ITS WEAR RESISTANCE LIU Yajun,WAN Zhengping,TANG Yong(China)
p14-4 (p980): DEVELOPMENT OF HIGH PRECISE DIE SPOTTING HYDRAULIC PRESS SU Donghai,CUI Xiao,LIANG Quan,WU Xihong(China)
p14-5 (p984): ANALYS IS AND SIMULATION OF DYNAMIC PROPERTIES OF HIGH FREQUENCY HYDRAULIC VIBRATOR SU Donghai,CUI Xiao,WU Xihong(China)
p14-6 (p990): STUDY ON THE WEAR LIFETIME OF THE DRIVING WHEEL WANG Fenghui,WAN Zhanhong,GAO Xingqi,JIAO Anyuan(China)
p14-7 (p996): THE SIMULATION OF THE WELDING PROCESS BASED ON CONCURRENT ENGINEERING WANG Su,LI Xiaohui,XIAO Yuping,CHEN Guanghui(China)
p14-8 (p1001): PROBLEM-BASED LEARNING PROGRAMS AIMING AT PRACTICAL APPLICATION OF KNOWLEDGE OF SPECIALIZED SUBJECTS YAMAGUCHI Kenji,KAWAZOE HisaMmi,KONDO Yasuo,SAKAMOTO Satoshi(Japan)
p14-9 (p1007): DEVELOPMENT OF CERAMIC SLIDING BEARING YANG Helai,RU Bingwei,SHI Jin(China)
p14-10 (p1012): STUDY ON METHOD AND APPLIANCE OF DRUM-TYPE GEAR FOR REDUCING CYCLECAR NOISE YIN Yufeng,YANG Jianwei(China)

related_files:
filepath:加工技术进展 第七届加工技术进展国际会议论文集=PROGRESS OF MACHINING TECHNOLOGY PROCEEDINGS OF THE SEVENTH INTERENCE ON PROGRESS OF MACHINING RECHNOLOGY 英文版_13434590.zip — md5:2cdf65bab8430d6347e30dfe1dff652e — filesize:251937600
filepath:13434590.zip — md5:d44e7bd30c8c31dd6763b231ca458eda — filesize:251683544
filepath:13434590.rar — md5:b45e09cb1c360457e653bfef2c67d4dc — filesize:250606636
filepath:13434590.zip — md5:0daf74ba5te5b63ccb66cbbdeec87fde — filesize:251683544
filepath:13434590.zip — md5:fff6c00f7b47cce6b098ec4756efb47e — filesize:251651290
filepath:/读秀/读秀4.0/读秀/4.0/数据库31-3/13434590.zip

2024-06-13