Collection of selected, peer reviewed papers from the International Scientific Conference Corrosion 2014, November 18-21, 2014, Gliwice, Poland.The 136 papers are grouped as follows:Chapter 1: Corrosion and Surface Engineering, Corrosion Protection; Chapter 2: Concrete Corrosion; Chapter 3: Corrosion and Surface Engineering in Industry; Chapter 4: Atmospheric Corrosion, Tribocorrosion, Erosion, Hydrogen Degradation and Diffusion; Chapter 5: Microbiological Corrosion; Chapter 6: High-Temperature Corrosion and Surface Strength, Thermal Coating; Chapter 7: Corrosion of Biomaterials; Chapter 8: Testing Methods Keyword: corrosion, degradation, corrosion protection, passivation, oxidation, biomaterials, coatings, materials science The Polish Corrosion Society holds a conference every three years, the 11th in 2014. About 120 papers selected for the proceedings cover corrosion and surface engineering, corrosion protection; concrete corrosion; corrosion and surface engineering in industry; atmospheric corrosion, tribocorrosion, erosion, hydrogen degradation, and diffusion; microbiological corrosion; high-temperature corrosion, surface strength, and thermal coating; corrosion in biomaterials; and testing methods. Specific topics include interaction between liquid magnesium alloy and glassy carbon particles, the effect of pre-treatment on the corrosion resistance of superheated materials, and the effect of process temperature on the surface layer of vacuum carburized low-alloy steel gears. -- Materials science-- Solid state materials and hard matter

Joanna Michalska; Sowa Maciej

Trans Tech Publishers

Diffusion and defect data, Volume 227, Pfaffikon, Switzerland, 2015

Diffusion and defect data, v. 227, Zurich, 2015

Solid State Phenomena, Switzerland, 2015

Switzerland, Switzerland

producers:
iTextSharpTM 5.5.3 ©2000-2014 iText Group NV (AGPL-version); modified using iTextSharpTM 5.5.3 ©2000-2014 iText Group NV (AGPL-version)

Corrosion and Surface Engineering 2
Preface and Organizing Committee 5
Table of Contents 7
Chapter 1: Corrosion and Surface Engineering, Corrosion Protection 14
Novel Concepts on the Growth of Corrosion Fatigue Small and Short Cracks 15
Corrosion Fatigue Crack Propagation Rates for Steam Turbine Blade 13% Cr Steels 19
Corrosion Behaviour of Amorphous and Nanocrystalline Alloys 23
Influence of Plastic Deformation on the Corrosion Behaviour of As-Cast AlMg2 and AlCu4Mg1 Aluminium Alloys in NaCl Solution 27
Influence of the Crystallographic Orientation of Grains and Plastic Deformation on the Electrochemical Behavior of Pure Aluminum in Sodium Chloride Solution 31
Structure and Corrosion Behavior of Mg-Cu-Y-(Zn,Ni) Bulk Metallic Glasses 35
The Influence of Deformation the Corrosion Resistance of Titanium Grade2 39
Influence of Ageing on the Corrosion Resistance of the ZnAl22Cu3 and ZnAl40Cu3 Alloys 43
Resistance to Electrochemical Corrosion of Extruded Magnesium Alloy AZ31 47
The Corrosion Processes Effect on Surface Roughness of Bonded Magnetic Material Based on Nd-(Fe,Co)-B Powder Type 51
The Influence of Reinforcement Purity on Corrosion Resistance of AM50/SiC Composites 55
The Properties of Refined Glasses with Aluminum Hydroxide Nano-Molecules 59
Corrosion Resistance of Sinters CNT-Cu/Cu 63
A Study on the Inhibition of J55 and P110SS Steel in 3.5% NaCl Solution Saturated with CO2 by Seed Extract of Momordica charantia (Karela) 67
Inhibition Effect of Guar Gum on the Corrosion Behaviour of Carbon Steel (K-55) in Fracturing Fluid 71
Investigation of Some Mannich Bases Corrosion Inhibitors for Carbon Steel 75
The Effect of Chloride Ions on the Passive Films of Titanium in Sulfuric Acids 79
Effect of Cadmium Addition on the Galvanic Corrosion of AM60 Magnesium Alloy in 0.1 M Sodium Chloride Solution 83
Studies on the Corrosion Properties of High-Mn Austenitic Steels 87
The Electrochemical and Immersion Corrosion of Casting Magnesium Alloys Containing Rare Earth Elements 91
Corrosion Behavior of MRI153M Magnesium Alloy in 3% NaCl Solution 95
Corrosion Behaviour of Magnesium Lithium Alloys in NaCl Solution 99
Corrosion of WE43 and AE44 Magnesium Alloys in Sodium Sulfate Solution 103
Electrochemical Corrosion Behaviour of Stainless Steels AISI 304 and 316L in Caribbean Sea Water 107
Adsorption Kinetics of Benzothiazole and 2-Mercaptobenzothiazole on Microcrystalline Gold and Silver Surfaces 111
Corrosion Resistance in Saline Environment of Colored Based Alumina Spectrally Selective Surfaces 115
The Effects of Inappropriate Corrosion Protection 119
The Effect of Ti and REE Addition on the Corrosion Resistance of the AlZn12Mg3.5Cu2.5 Alloy in "Acid Rain" Environment 123
Corrosion Resistance of AA2024-T3 Coated with Graphene/Sol-Gel Films 127
Corrosion Behavior of Hybrid Sol-Gel Films Reinforced with Electrospun Nanofibers 131
Epoxy-Polyelectrolite Composites as a Basis of Intellectual Coating for Protection from Underfilm Corrosion on Cathodically Polarizable Structures 135
Properties of Functional Epoxy Coatings Modified by Carbon Nanoparticles 139
Solid State NMR and EIS Examination of SiO2-Epoxy Hybrid Coatings on Stainless Steel 143
Anticorrosive Property of Potassium Dichromate Film on Galvanized Coating in Distilled Water 147
Anodic Treatment of Zn-Ni Alloy in Alkaline Solutions 151
Electrodeposition of Zinc Coatings from Ionic Liquid 155
Galvanic Formation of Zn-Ni/Zn-Co Type Multilayer Alloy Coatings on Steel Substrate 159
Microplasma Oxidation of Magnesium Alloy AZ91D by Impulse Current 163
XPS Study of Surface Layer Formed on AISI 316L after High-Current Density Electropolishing 167
Evaluation of the Growth Mechanism of Ti-Containing Conversion Coatings Using XPS 171
Corrosion Resistance of Cerium Based Silane-Zeolite Coatings on AA6061 Alloy 175
Corrosion Resistance of Copper Sheet after Laser Treatment 179
Thermally Sprayed Coatings as Corrosion Protection for Steel Structures – Influence of the Manufacturing Processes on the Coating Quality 183
Zirconium Modified Aluminide Coatings Obtained by the CVD Method 186
Study of Interaction between Liquid Magnesium Alloy and Glassy Carbon Particles 190
Chapter 2: Concrete Corrosion 194
Corrosion Inhibition of Concrete Steel-Reinforcement in Saline/Marine Simulating-Environment by Rhizophora mangle L. 195
Deterioration of Cement Composites with Silica Fume Addition due to Chemical and Biogenic Corrosion Processes 200
The Influence of Waste Expanded Perlite on Chemical Durability of Mortars 204
Corrosion Behavior of Hybrid Organic-Inorganic Coated Steel in Simulated Concrete Pore Solution 209
Mild Steel Passivation and Depassivation in Simulated Concrete Pore Solution Containing Bacteria Metabolites 213
Bio-Corrosion of Fibrous Cement Boards and Cement Composites 217
Chapter 3: Corrosion and Surface Engineering in Industry 221
Sulphur Species Corrosivity in Refinery Feed Stock 222
The Corrosion of HDG Zinc Coatings on the Road and Urban Infrastructures 226
Comparison of Human Health and Safety Loss due to Corroded Gas Pipeline Failure in Rural and Urban Areas: A Case Study in Malaysia 230
The Consequence Assessment of Gas Pipeline Failure due to Corrosion 234
Investigation of the Degradation Mechanism of Platinum-Rhodium Catalytic Wires during Oxidation of Ammonia Process 238
Properties of Rubber Lining after Sixteen Years Operation in Different Places of FGD Plant 242
Chapter 4: Atmospheric Corrosion, Tribocorrosion, Erosion, Hydrogen Degradation and Diffusion 246
Atmospheric Corrosion Protection of Metallic Structures Using Geocements-Based Coatings 247
Nanocomposite Layers Obtained by Electro-Co-Deposition: Corrosion and Tribocorrosion Properties 251
Microstructure and Tribocorrosion Properties of Titanium Matrix Nanocomposites Manufactured by Selective Laser Sintering/Melting Method 255
The Influence of Temperature on Erosion Resistance of Carbide Coatings Deposited by APS Method 259
Microstructural Phenomena Occurring during Early Stages of Cavitation Erosion of Al-Si Aluminium Casting Alloys 263
Hydrogen Diffusion Characteristics in the TRIP 800 C-Mn-Si Steel 267
Hydrogenation and Corrosion Properties of LaNi4.5Co0.5-Based Alloy Doped with 1.7 at% Sn 271
The Effect of Pre-Hydrogen Charging on Corrosion Behaviour of Superduplex Stainless Steel Welded Joints 275
Hydrogen Absorption by Co-Substituted Nd-Fe-B High Coercivity Magnetic Material 279
Nickel Electrode Precursor Covered by Pt, Ni and Pt/Ni Layers Using Sol-Gel Method 283
Chapter 5: Microbiological Corrosion 287
Inhibition of Steel-Rebar Corrosion in Industrial/Microbial Simulating-Environment by Morinda lucida 288
Growth of Acidithiobacillus thiooxidans Biofilm on Glass, Concrete and Stoneware 293
Differences between A. thiooxidans and A. ferrooxidans Biofilms Formed on Concrete and Stoneware 297
Microbiologically Induced Corrosion Monitoring Using Open-Circuit Potential (OCP) Measurements 301
Turbidity Method to Measure the Growth of Anaerobic Bacteria Related to Microbiologically Influenced Corrosion 305
Biofilm Formation on NiTi Surface by Different Strains of Sulphate Reducing Bacteria (Desulfovibrio desulfuricans) 309
Chapter 6: High-Temperature Corrosion and Surface Strength, Thermal Coating 313
The Effect of Pretreatment on the Corrosion Resistance of Superheater Materials 314
The Effect of the Aluminide Coating on the Thermal Properties and Oxidation Resistance of Inconel 625 Ni-Base Superalloy 318
The Formation of TBCs Using LPPS, CVD and PS-PVD Methods on CMSX-4 Single-Crystal Nickel Superalloy 322
The Influence of Overaluminizing on TGO Formation on Thermal Barrier Coatings Deposited by Low Pressure Plasma Spraying and Chemical Vapour Deposition Methods on Rene 80 Nickel Superalloy 326
Microstructure and Isothermal Oxidation Resistance of Thermal Barrier Coatings Deposited by LPPS, CVD and PS-PVD Methods on Inconel 617 Nickel Superalloy 330
Heat Resistance and Heat Capacity of the Selected Nickel Superalloys 334
Microstructure of Thermal Barrier Coatings Deposited by Low Pressure Plasma Spraying and Chemical Vapour Deposition Methods on Rene 80 Nickel Superalloy 338
Evaluation of Hot Corrosion Resistance of Directionally Solidified Nickel-Based Superalloy 342
The Impact of the Organic Form of Sulphur Originating from Coal on the Performance of Solid Oxide Fuel Cells 346
Oxidation Behavior of Aluminide Coated Ti-Al-Cr-Nb-Zr-Y Alloys at High Temperatures 350
Degradation of Diffusive Aluminide Coating after Service in ZhS6K Superalloy 354
Hafnium Modified Aluminide Coatings Obtained by the CVD and PVD Methods 358
The Influence of Activator on Vapour Phase Aluminizing of TiAl Intermetallics 362
The Oxidation Resistance of Nonmodified and Zr-Modified Aluminide Coatings Deposited by the CVD Method 366
The Influence of the Chemical Composition of Superalloys on the Oxidation Resistance of Aluminide Coating 370
Influence of Deposition Parameters on Structure of TDCs Deposited by PS-PVD Method 374
Microstructure of TBC Coatings Deposited by HVAF and PS-PVD Methods 378
The Technology of TBC Deposition by EB-PVD Method 382
Analysis of Crystallite Size Changes in an Oxide Layer Formed on Steel during Long-Term Operation at an Elevated Temperature 386
Influence of Surface Condition on Oxides Layer Morphology on NiCrAlY Coating during Oxidation at Temperature 1000°C and 1100°C 390
Studies on the Adhesion of Oxide Layer Formed on Steel Long-Term Operated at an Elevated Temperature 394
Comparison of High-Temperature Oxidation Onset Behavior of Sanicro 28 Steel with KCl, NaCl and K2CO3 398
Evaluation of High-Temperature Corrosion on 16Mo3 Steel Long-Term Operated at an Elevated Temperature 402
High-Temperature Corrosion Resistance of Welded Joints in Sanicro 25 Steel 406
High-Temperature Corrosion Resistance of Welded Joints in HR6W Alloy 410
The Morphology of Corrosion Products in FeAl Alloys after Heat-Resistance Tests at Different Temperatures 414
Thermal Properties of YSZ Powders for Plasma Spraying 418
Oxidation Resistance of Diffusion Silicide Coatings on Mo and TZM Alloy 422
Nonstoichiometry and Chemical Diffusion in Co3O4 Cobalt Oxide 426
Process Temperature Effect on Surface Layer of Vacuum Carburized Low-Alloy Steel Gears 430
Chapter 7: Corrosion of Biomaterials 434
Corrosion and Mechanical Behavior of Biodegradable Metallic Biomaterials 435
Corrosion Behaviour of Ti6Al4V and TiMo10Zr4 Alloys in the Ringer’s Solution: Effect of pH and Plastic Strain 439
Corrosion Study of Amorphous Mg67Zn29Ca4 Alloy 443
Effect of Polarization Scan Rate on the Pitting Potential of the Self-Passivated NiTi Shape Memory Alloy in a Simulated Body Fluid 447
Electrochemical Behavior of Materials Used in Dental Implantological Systems 451
Electrochemical Behaviour of Co-Cr and Ni-Cr Dental Alloys 455
Fretting – Corrosion of Co-Cr-Mo Alloy in Oral Cavity Environment 459
Improvement of the Corrosion Resistance of Biomedical Magnesium Alloys in the Ringer’s Solution Using Protective Coatings 463
Influence of Ultrasound Bone Union Stimulation on Corrosion Resistance of Titanium Alloys 467
Corrosion Properties of Anodically Oxidised and Alkaline Treated Titanium Nitride 471
Corrosion Properties of Plasma Oxidized Titanium Nitride for Biomedical Applications 475
Corrosion Properties of Oxide Layers Produced on Titanium Nitride by Means of Plasma Electrolytic Oxidation of Various Duration 479
Effect of the High Voltage Anodic Oxidation on the Titanium Corrosion Resistance 483
Corrosion Resistance of Ti6Al7Nb Alloy after Various Surface Modifications 487
Electrochemical Properties of cpTi with Modified Surface Used for Implants in Blood and Vascular System 491
Impact of Surface Modification of Ti-6Al-7Nb Alloy on Electrochemical Properties in the Environment of Artificial Blood Plasma 495
Increasing the Surface Functionality of Mg Alloys by Means of Plasma Electrolytic Oxidation 499
Influence of Electrolytic Polishing and Anodic Passivation on Corrosion Resistance of Ti-15Mo Alloy 503
Corrosion Behaviour of Thermodiffusion Coatings on Titanium Implants in Simulated Body Fluids 507
Corrosion Behavior of a Novel Hybrid Co/UHMWPE Composite Biocoating with Potential Application as a Biomaterial 511
Potential of Superhydrophobic Layer on the Implant Surface 515
Electrochemical Impedance Spectroscopy Behaviour of NdFeB Coated Magnets in Saliva Solution for Orthodontic Applications 519
Corrosion Properties of Ti Scaffolds Prepared with Sucrose as a Space Holder 523
Corrosion Resistance of Hip Endoprosthesis Cups in the Initial State and after Implantation 527
Effect of Artificial and Inflammatory Saliva on Desulfovibrio desulfuricans Growth and Biofilm Formation on NiTi Alloy 531
Effects of Sn and Mo Contents on the Electrochemical Behavior of Biomedical Ti-Mo-Sn Alloys Prepared in the Powder Metallurgy Process 535
Chapter 8: Testing Methods 539
Experimental Corrosion Tests on Weathering Steel Bridges 540
Application of Research Methods in Expert Opinions 544
Detection of the Corrosion of Axisymmetric Elements by Means of the Eddy Current Testing Method 548
Application of the Electrochemical Microcell Technique in Solid State Surface Analysis 552
The Concept of Using Model Gas Turbine for Burner Rig Corrosion Test 556
Machine Vision System for Corrosion Detection as an Additional Tool beside EIS for Evaluation of Protective Properties of Electrolessly Deposited Ni-P Coatings 560
Equipment for Low Pressure Plasma Spraying Processes – A Review 564
Keywords Index 568
Authors Index 573

Collection of 136 selected, peer reviewed papers from the International Scientific Conference Corrosion 2014, November 18-21, 2014, Gliwice, Poland. About 120 papers selected for the proceedings cover corrosion and surface engineering, corrosion protection; concrete corrosion; corrosion and surface engineering in industry; atmospheric corrosion, tribocorrosion, erosion, hydrogen degradation, and diffusion; microbiological corrosion; high-temperature corrosion, surface strength, and thermal coating; corrosion in biomaterials; and testing methods. Specific topics include interaction between liquid magnesium alloy and glassy carbon particles, the effect of pre-treatment on the corrosion resistance of superheated materials, and the effect of process temperature on the surface layer of vacuum carburized low-alloy steel gears

Collection of selected, peer reviewed papers from the International Scientific Conference Corrosion 2014, November 18-21, 2014, Gliwice, Poland. The 136 papers are grouped as follows:Chapter 1: Corrosion and Surface Engineering, Corrosion Protection; Chapter 2: Concrete Corrosion; Chapter 3: Corrosion and Surface Engineering in Industry; Chapter 4: Atmospheric Corrosion, Tribocorrosion, Erosion, Hydrogen Degradation and Diffusion; Chapter 5: Microbiological Corrosion; Chapter 6: High-Temperature Corrosion and Surface Strength, Thermal Coating; Chapter 7: Corrosion of Biomaterials; Chapter 8: T

2024-06-27